April-2026 |
|||
|---|---|---|---|
|
Fitness for Service Assessment: API 579-1 and ASME FFS StandardsFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
Machine ElementsEvery machine uses machine elements for either statical or dynamical purposes. This course is designed to give the information on machine design and selection of machine elements as well as basic facts of machine element ... |
|
Register |
|
Machinery Vibration & Condition MonitoringAn introduction to performing vibration analysis within a condition-monitoring program. Various techniques used to diagnose machinery condition are reviewed, including time waveforms, spectral analysis, phase measurement ... |
|
Register |
|
ASME B31.3 Process Piping Code Design RequirementsThis intensive five-day course is designed to give the participants a thorough understanding of Process Piping Code, ASME B31.3. and its practical use for all aspects right from Piping Design to testing and certification ... |
|
Register |
|
Advanced Pump Maintenance, Troubleshooting & Best PracticesIn this 5-day course, participants will gain a strong technical and practical understanding of pumps through the exploration of design features and implications of many pump types, pump systems, pump installation, pump p ... |
|
Register |
|
Heat Exchanger Overhaul & Testing TechniquesThis course concentrates on heat exchanger hardware, performance requirements, overhaul procedures, testing techniques, maintenance and repair, and life extension. The material applies to tubular exchangers used in chemi ... |
|
Register |
|
Piping Systems Mechanical Design And SpecificationThis course for engineers and piping system designers reviews the key areas associated with the design of piping systems for oil and gas facilities. |
|
Register |
May-2026 |
|||
|---|---|---|---|
|
ASME B31.3 Process Piping Design CodeThis interactive training course provides an introduction to the Code, covering the requirements for the design, analysis, materials, fabrication, testing and inspection of process piping systems. Changes to the latest e ... |
|
Register |
|
Gears Types, Installation and MaintenanceKnowledge of gears and gear systems is critical in today's mechanized world. This course covers gear basics, installations, maintenance and troubleshooting as well as parallel and perpendicular shaft configurations; attr ... |
|
Register |
|
Centrifugal Compressor & Steam TurbineCentrifugal compressors are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. In a centrifugal compressor, energy is transferred from a set of rotating impeller blades to the gas. It is also called som ... |
|
Register |
|
Measuring Mechanical Vibrations and Methods of MeasurementThis course is designed to provide participants with an introduction to the fundamental concepts of vibration measurment. Participants will learn an appreciation for harmonic motion as well as the modeling of mechanical ... |
|
Register |
|
Principles and Components of Hydraulic SystemsThe course discusses to expand the maintenance technicians knowledge and skills in the area of Industrial Hydraulic applications. It begins with an overview of hydraulic principles, discusses the function, operation and ... |
|
Register |
|
Pipeline Design, Inspection, and TestingThe intent and objective of this course is to provide the participants with the information relative to the basic concepts and principals involved with the design, inspection and testing of pipeline, Guidelines and notes ... |
|
Register |
|
Valves Classes & Pressure Rating, SRV’s Inspection & MaintenanceValves and Pressure Relieving Devices plays a vital role in assuring plant integrity and safe operation by avoid exposure of plant equipment to un-safe actions and excess pressure for which they are not designed and not ... |
|
Register |
|
Heat Exchangers Operation, Maintenance & InspectionA heat exchanger is a component that allows the transfer of heat from one fluid (liquid or gas) to another fluid. Reasons for heat transfer include the following: • To heat a cooler fluid by means of a hotter fluid • T ... |
|
Register |
|
Mechanical Integrity, Safety & ReliabilityThis course will provide a comprehensive review of the various aspects of engineered safety and mechanical integrity in refineries, oil & gas plants and petrochemical plants. Principal emphasis is placed on the primary m ... |
|
Register |
 & Refrigeration Systems.jpg)
|
Heating, Ventilation, Air-Conditioning (HVAC) & Refrigeration Systems: Design, Installation, Maintenance & TroubleshootingThis program is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to the fundamentals of Heating, Ventilation and Air-conditioning. It commen ... |
|
Register |
.jpeg)
|
Application of Standards in Boilers, Pressure Vessels, and Piping SystemsPressure equipment such as boilers, pressure vessels, heat exchangers, pressure piping, and associated safety equipment are widely used in many industries (e.g., oil and gas, petrochemicals, fertilizers, hydrocarbon proc ... |
|
Register |
.jpg)
|
Effective HVAC Maintenance & TroubleshootingHVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to ... |
|
Register |
.jpg)
|
Combined Cycle Gas Turbine PerformanceThis course goes through the overview of a Combined Cycle Gas Turbine, this will be followed by the different types of Gas Turbine. This is then expanded on to give a detailed understanding of the performance and managem ... |
|
Register |
.jpg)
|
Advanced Machinery DiagnosticThis course provides attendees the training needed to extend their knowledge of machinery diagnostic techniques and rotor dynamics as applied to rotating machinery. In particular, they will learn the use of synchronous a ... |
|
Register |
|
Pipeline Design, Maintenance & Rehabilitation PracticesThe intent and objective of this course is to provide the participants with the information relative to the basic concepts and principals involved with the design, inspection and testing of pipeline, Guidelines and notes ... |
|
Register |
|
Design & Fabrication Of Piping Systems & Code RequirementsNSI/API code requirements for design and construction is needed to assure the safety petroleum refinery and chemical plant piping. The designer, fabricator, supplier, erector, examiner, and inspector’s understanding and ... |
|
Register |
|
Research Methodology introduction for minimum flow assurance for main export pipelineFlow assurance is the application of multiple disciplines to ensure economic rates of flow from the hydrocarbon reservoir to a production facility over the life of a field and in any environment. A variety of problems ca ... |
|
Register |
June-2026 |
|||
|---|---|---|---|
|
Piping Mechanical Design & SpecificationThis foundation level course for engineers and piping system designers reviews the key areas associated with the design of piping systems for oil and gas facilities. |
|
Register |
|
ASME Section VIII Div. 2 Pressure VesselsBased on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of ASME Section VIII, Division 1&2 including background, organization, design, materials, fa ... |
|
Register |
|
Custody Transfer and Flow MeasurementCustody transfer in fluid measurement is defined as the metering point (location) where the fluid is being measured for sale from one party to another. It organizes the commercial transactions of good (Oil and Gas produ ... |
|
Register |
|
Heating, Ventilation, and Air Conditioning (HVAC)The Heating, Ventilation, Air Conditioning and Refrigeration (HVAC and R) industry designs, builds, maintains and repairs essential indoor comfort and cooling systems including heating, ventilation and air conditioning. ... |
|
Register |
|
Metallurgical Failure AnalysisThis course will give you a basic understanding of the concepts and practice of analyzing failed parts. Such analyses will save money by eliminating repeated part replacement and increase customer satisfaction. They can ... |
|
Register |
|
Pump Selection, Operation and TroubleshootingIn every plant or production operation system, we find pumps. However, unlike bolts and nuts, neither industry nor production-operation management will put pumps in stock. It is NOT cost effective and is very uncommon pr ... |
|
Register |
|
Gas Turbine and Steam Turbine balancingA comprehensive gas and steam turbine course offers a deep dive into the fundamental principles, design, operation, and maintenance of gas and steam turbines. These turbines are pivotal in power generation and are extens ... |
|
Register |
|
Fundamentals of Pipelines: Design, Inspection, Testing, and Hydraulic ModelingPipelines play a crucial role in modern society, serving as the backbone of many industries and essential services |
|
Register |
.jpg)
|
Machinery Bearings, Lubrication & Reliability (Engineering Tribology)In this 5-day course, participants will gain a strong technical and practical understanding of bearing design features and implications of many bearings types. This course will provide the participants with the knowledge ... |
|
Register |
|
Pumps & Compressors Operation, Maintenance &TroubleshootingPumps and compressors are essential components in almost all industries in that they are required to meet system demands and operate reliably. Further, since they can consume approximately 30% of a plant’s total energy u ... |
|
Register |
|
Heating, Ventilation & Air Conditioning (HVAC)The Heating, Ventilation, Air Conditioning and Refrigeration (HVAC and R) industry designs, builds, maintains and repairs essential indoor comfort and cooling systems including heating, ventilation and air conditioning. ... |
|
Register |
|
Hydraulics Principles, Troubleshooting and Circuit KnowledgeThe Fundamental Hydraulic & Pneumatic course is designed to equip delegates with the basic foundation knowledge and building blocks that underpin all hydraulic pneumatic systems. On completion of the course, delegates ... |
|
Register |
|
Bearings & Lubrication Applications, Methods, and HandlingIn this 5-day course, participants will gain a strong technical and practical understanding of bearings design features and implications of many bearings types. This course will provide the participants with ... |
|
Register |
|
Advanced machinery dynamics and BalancingThis advanced course provides a comprehensive understanding of the dynamic behavior of rotating machinery and the principles of vibration and balancing as applied in modern industrial environments. Participants will expl ... |
|
Register |
|
Gas Turbine BalancingThis course provides a comprehensive understanding of gas turbine dynamics and balancing principles. Participants will gain knowledge of rotor behavior, vibration analysis, and balancing techniques to enhance turbine rel ... |
|
Register |
.jpg)
|
Pumps, Compressors And Turbines TroubleshootingThis course is to provide the trainees with a strong background in the field of Advanced Rotating Equipment (Pumps, Compressors, and turbines) maintenance and troubleshooting. In addition, the trainee will have a backgr ... |
|
Register |
|
Mechanical Shaft Alignment & Vibrational AnalysisThis training provides participants with a complete understanding of shaft alignment principles and vibrational analysis techniques essential for maintaining and improving the performance of rotating machinery. |
|
Register |
|
Machinery Failure Analysis, Prevention & TroubleshootingThis course provides participants with in-depth knowledge of machinery failure mechanisms, diagnostic techniques, preventive strategies, and effective troubleshooting methods. |
|
Register |
|
Advanced Troubleshooting Of Rotating EquipmentThis aims to convey the latest thinking and best practice of machinery vibration monitoring and analysis via lectures, case studies, video films, and friendly software and course activities. The course gives a detailed a ... |
|
Register |
.jpg)
|
Audits of Existing Rotating Machinery InstallationsUpon completion of this course, participants will gain a basic understanding of the main components and subsystems of audit procedures. They will learn to critique the advantages, applications, performance, and economics ... |
|
Register |
.jpg)
|
Advanced Valve Technology: Design, Selection, Installation, Applications, Sizing, Inspection, Maintenance & TroubleshootingPower plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ... |
|
Register |
|
Rotating Equipment Reliability Optimization & Continuous ImprovementRotating equipment is essential for gas and oil processing plants. The designers as well as the operating and maintenance staff are usually confronting with major issues regarding the reliability, optimization and contin ... |
|
Register |
|
Utilities Equipment: Steam Generator, Water Treatment and Storage TanksThe Process Utility Systems training course will feature the importance and relevance of process utilities used in today industrial operations. It will familiarise the delegates with the various practices used for select ... |
|
Register |
|
Intelligent Pigging & Mechanical Cleaning Of Offshore & Onshore PipelinesThis RECTUS Intelligent Pigging & Mechanical Cleaning of offshore & Onshore Pipelines training course consolidates the fundamental knowledge and experiences required by pipeline operators to ensure the pipeline network i ... |
|
Register |
|
Mechanical Equipment: Compressors, Pumps, Motors & Variable Speed DrivesThis course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and ... |
|
Register |
|
Recent Trend In Furnaces, Heat Exchanger And Coolers In Petrochemical PlantsHeat exchangers are designed to transfer heat more efficiently from one medium to another. Typically, heat exchangers use fluids to store heat but recently, with the creation of more advanced technology; gases can now be ... |
|
Register |
|
Rolling Technology of Metals and SheetsThis course fly by the participants through a sky of Rolling Technology as a technical process have many types , many industries , many materials , many branches , many aspects and many advantages , If you want to fly yo ... |
|
Register |
|
Turbo Machinery Monitoring And Problem AnalysisThis course is for experienced mechanical equipment engineers to develop and expand their capabilities in monitoring and problem analysis of turbo machinery. |
|
Register |
July-2026 |
|||
|---|---|---|---|
|
Advanced Topics in Mechanical Failures and System AnalysisMechanical failures are the cause of the production stops and should be eliminated with correct maintenance and understanding of failures. Mechanical failure analysis provides the causes of the failures, which ought to ... |
|
Register |
|
|
Machinery Vibration & Condition MonitoringAn introduction to performing vibration analysis within a condition-monitoring program. Various techniques used to diagnose machinery condition are reviewed, including time waveforms, spectral analysis, phase measurement ... |
|
Register |
|
Bearing Types, Installation & DisassemblingThis course is designed to help the participants to master the fundamentals of bearing technology. The program covers proper bearing installation, removal, lubrication and troubleshooting. It introduces a maintenance emp ... |
|
Register |
|
|
Fitness for Service Assessment: API 579-1 and ASME FFS StandardsFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
Methods of Shaft AlignmentThis course discusses the importance of alignment. Participants will be able to identify the area of error and correct it accordingly. They will learn how to correct soft foot, check runout, align two pieces of rotating ... |
|
Register |
|
|
Machine ElementsEvery machine uses machine elements for either statical or dynamical purposes. This course is designed to give the information on machine design and selection of machine elements as well as basic facts of machine element ... |
|
Register |
|
Study of Hydraulic Circuit Components, Fittings and HosesHydraulic Circuit Components course helps participants to understand the fundamentals of hydraulic circuits technology. It is designed to familiarize them with hydraulic circuits principles such as pumps, actuators, valv ... |
|
Register |
|
|
ASME B31.3 Process Piping Code Design RequirementsThis intensive five-day course is designed to give the participants a thorough understanding of Process Piping Code, ASME B31.3. and its practical use for all aspects right from Piping Design to testing and certification ... |
|
Register |
|
Mechanical Seals & Gland Packing'sIn this 5-day course, participants will gain a strong technical and practical understanding of mechanical seals and gland packing through the exploration of design features and implications of many sealing pump systems. ... |
|
Register |
|
Boiler Operations and Maintenance with Inspection, Repairs and Alterations Combo Course - ASMEBoilers are important energy consuming equipment in most manufacturing plants, and their production of steam or hot water generally uses old and well proven technology. Basic boiler technology has changed relatively litt ... |
|
Register |
|
|
Advanced Pump Maintenance, Troubleshooting & Best PracticesIn this 5-day course, participants will gain a strong technical and practical understanding of pumps through the exploration of design features and implications of many pump types, pump systems, pump installation, pump p ... |
|
Register |
|
|
Heat Exchanger Overhaul & Testing TechniquesThis course concentrates on heat exchanger hardware, performance requirements, overhaul procedures, testing techniques, maintenance and repair, and life extension. The material applies to tubular exchangers used in chemi ... |
|
Register |
.jpeg)
|
Pneumatic and hydraulic systems, Fault Diagnostics Instrument TrainingThis course is an introduction to the basic hydraulic and pneumatic systems and devices found in advanced manufacturing facilities. Underlying scientific principles and their practical applications are covered. |
|
Register |
|
|
Effective HVAC Maintenance & TroubleshootingHVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to ... |
|
Register |
|
|
Advanced Machinery DiagnosticThis course provides attendees the training needed to extend their knowledge of machinery diagnostic techniques and rotor dynamics as applied to rotating machinery. In particular, they will learn the use of synchronous a ... |
|
Register |
|
|
Pipeline Design, Maintenance & Rehabilitation PracticesThe intent and objective of this course is to provide the participants with the information relative to the basic concepts and principals involved with the design, inspection and testing of pipeline, Guidelines and notes ... |
|
Register |
|
|
Piping Systems Mechanical Design And SpecificationThis course for engineers and piping system designers reviews the key areas associated with the design of piping systems for oil and gas facilities. |
|
Register |
August-2026 |
|||
|---|---|---|---|
|
|
ASME B31.3 Process Piping Design CodeThis interactive training course provides an introduction to the Code, covering the requirements for the design, analysis, materials, fabrication, testing and inspection of process piping systems. Changes to the latest e ... |
|
Register |
|
|
Pipeline Design, Inspection, and TestingThe intent and objective of this course is to provide the participants with the information relative to the basic concepts and principals involved with the design, inspection and testing of pipeline, Guidelines and notes ... |
|
Register |
|
|
Centrifugal Compressor & Steam TurbineCentrifugal compressors are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. In a centrifugal compressor, energy is transferred from a set of rotating impeller blades to the gas. It is also called som ... |
|
Register |
|
|
Fundamentals of Pipelines: Design, Inspection, Testing, and Hydraulic ModelingPipelines play a crucial role in modern society, serving as the backbone of many industries and essential services |
|
Register |
|
|
Gears Types, Installation and MaintenanceKnowledge of gears and gear systems is critical in today's mechanized world. This course covers gear basics, installations, maintenance and troubleshooting as well as parallel and perpendicular shaft configurations; attr ... |
|
Register |
|
|
Measuring Mechanical Vibrations and Methods of MeasurementThis course is designed to provide participants with an introduction to the fundamental concepts of vibration measurment. Participants will learn an appreciation for harmonic motion as well as the modeling of mechanical ... |
|
Register |
|
|
Principles and Components of Hydraulic SystemsThe course discusses to expand the maintenance technicians knowledge and skills in the area of Industrial Hydraulic applications. It begins with an overview of hydraulic principles, discusses the function, operation and ... |
|
Register |
|
|
Valves Classes & Pressure Rating, SRV’s Inspection & MaintenanceValves and Pressure Relieving Devices plays a vital role in assuring plant integrity and safe operation by avoid exposure of plant equipment to un-safe actions and excess pressure for which they are not designed and not ... |
|
Register |
|
|
Heat Exchangers Operation, Maintenance & InspectionA heat exchanger is a component that allows the transfer of heat from one fluid (liquid or gas) to another fluid. Reasons for heat transfer include the following: • To heat a cooler fluid by means of a hotter fluid • T ... |
|
Register |
|
|
Mechanical Integrity, Safety & ReliabilityThis course will provide a comprehensive review of the various aspects of engineered safety and mechanical integrity in refineries, oil & gas plants and petrochemical plants. Principal emphasis is placed on the primary m ... |
|
Register |
|
|
Heating, Ventilation, Air-Conditioning (HVAC) & Refrigeration Systems: Design, Installation, Maintenance & TroubleshootingThis program is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to the fundamentals of Heating, Ventilation and Air-conditioning. It commen ... |
|
Register |
|
|
Application of Standards in Boilers, Pressure Vessels, and Piping SystemsPressure equipment such as boilers, pressure vessels, heat exchangers, pressure piping, and associated safety equipment are widely used in many industries (e.g., oil and gas, petrochemicals, fertilizers, hydrocarbon proc ... |
|
Register |
|
|
Hydraulics Principles, Troubleshooting and Circuit KnowledgeThe Fundamental Hydraulic & Pneumatic course is designed to equip delegates with the basic foundation knowledge and building blocks that underpin all hydraulic pneumatic systems. On completion of the course, delegates ... |
|
Register |
|
|
Advanced machinery dynamics and BalancingThis advanced course provides a comprehensive understanding of the dynamic behavior of rotating machinery and the principles of vibration and balancing as applied in modern industrial environments. Participants will expl ... |
|
Register |
|
|
Gas Turbine BalancingThis course provides a comprehensive understanding of gas turbine dynamics and balancing principles. Participants will gain knowledge of rotor behavior, vibration analysis, and balancing techniques to enhance turbine rel ... |
|
Register |
|
|
Mechanical Shaft Alignment & Vibrational AnalysisThis training provides participants with a complete understanding of shaft alignment principles and vibrational analysis techniques essential for maintaining and improving the performance of rotating machinery. |
|
Register |
|
|
Pumps, Compressors And Turbines TroubleshootingThis course is to provide the trainees with a strong background in the field of Advanced Rotating Equipment (Pumps, Compressors, and turbines) maintenance and troubleshooting. In addition, the trainee will have a backgr ... |
|
Register |
|
|
Machinery Failure Analysis, Prevention & TroubleshootingThis course provides participants with in-depth knowledge of machinery failure mechanisms, diagnostic techniques, preventive strategies, and effective troubleshooting methods. |
|
Register |
|
|
Combined Cycle Gas Turbine PerformanceThis course goes through the overview of a Combined Cycle Gas Turbine, this will be followed by the different types of Gas Turbine. This is then expanded on to give a detailed understanding of the performance and managem ... |
|
Register |
|
|
Utilities Equipment: Steam Generator, Water Treatment and Storage TanksThe Process Utility Systems training course will feature the importance and relevance of process utilities used in today industrial operations. It will familiarise the delegates with the various practices used for select ... |
|
Register |
|
|
Design & Fabrication Of Piping Systems & Code RequirementsNSI/API code requirements for design and construction is needed to assure the safety petroleum refinery and chemical plant piping. The designer, fabricator, supplier, erector, examiner, and inspector’s understanding and ... |
|
Register |
|
|
Research Methodology introduction for minimum flow assurance for main export pipelineFlow assurance is the application of multiple disciplines to ensure economic rates of flow from the hydrocarbon reservoir to a production facility over the life of a field and in any environment. A variety of problems ca ... |
|
Register |
|
|
Rolling Technology of Metals and SheetsThis course fly by the participants through a sky of Rolling Technology as a technical process have many types , many industries , many materials , many branches , many aspects and many advantages , If you want to fly yo ... |
|
Register |
September-2026 |
|||
|---|---|---|---|
|
|
ASME Section VIII Div. 2 Pressure VesselsBased on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of ASME Section VIII, Division 1&2 including background, organization, design, materials, fa ... |
|
Register |
|
|
Custody Transfer and Flow MeasurementCustody transfer in fluid measurement is defined as the metering point (location) where the fluid is being measured for sale from one party to another. It organizes the commercial transactions of good (Oil and Gas produ ... |
|
Register |
|
|
Heating, Ventilation, and Air Conditioning (HVAC)The Heating, Ventilation, Air Conditioning and Refrigeration (HVAC and R) industry designs, builds, maintains and repairs essential indoor comfort and cooling systems including heating, ventilation and air conditioning. ... |
|
Register |
|
|
Metallurgical Failure AnalysisThis course will give you a basic understanding of the concepts and practice of analyzing failed parts. Such analyses will save money by eliminating repeated part replacement and increase customer satisfaction. They can ... |
|
Register |
|
|
Pump Selection, Operation and TroubleshootingIn every plant or production operation system, we find pumps. However, unlike bolts and nuts, neither industry nor production-operation management will put pumps in stock. It is NOT cost effective and is very uncommon pr ... |
|
Register |
|
|
Gas Turbine and Steam Turbine balancingA comprehensive gas and steam turbine course offers a deep dive into the fundamental principles, design, operation, and maintenance of gas and steam turbines. These turbines are pivotal in power generation and are extens ... |
|
Register |
|
|
Piping Mechanical Design & SpecificationThis foundation level course for engineers and piping system designers reviews the key areas associated with the design of piping systems for oil and gas facilities. |
|
Register |
|
|
Pumps & Compressors Operation, Maintenance &TroubleshootingPumps and compressors are essential components in almost all industries in that they are required to meet system demands and operate reliably. Further, since they can consume approximately 30% of a plant’s total energy u ... |
|
Register |
|
|
Machinery Bearings, Lubrication & Reliability (Engineering Tribology)In this 5-day course, participants will gain a strong technical and practical understanding of bearing design features and implications of many bearings types. This course will provide the participants with the knowledge ... |
|
Register |
|
|
Heating, Ventilation & Air Conditioning (HVAC)The Heating, Ventilation, Air Conditioning and Refrigeration (HVAC and R) industry designs, builds, maintains and repairs essential indoor comfort and cooling systems including heating, ventilation and air conditioning. ... |
|
Register |
|
|
Bearings & Lubrication Applications, Methods, and HandlingIn this 5-day course, participants will gain a strong technical and practical understanding of bearings design features and implications of many bearings types. This course will provide the participants with ... |
|
Register |
|
|
Effective HVAC Maintenance & TroubleshootingHVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to ... |
|
Register |
|
|
Advanced Valve Technology: Design, Selection, Installation, Applications, Sizing, Inspection, Maintenance & TroubleshootingPower plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ... |
|
Register |
|
|
Audits of Existing Rotating Machinery InstallationsUpon completion of this course, participants will gain a basic understanding of the main components and subsystems of audit procedures. They will learn to critique the advantages, applications, performance, and economics ... |
|
Register |
|
|
Advanced Troubleshooting Of Rotating EquipmentThis aims to convey the latest thinking and best practice of machinery vibration monitoring and analysis via lectures, case studies, video films, and friendly software and course activities. The course gives a detailed a ... |
|
Register |
|
|
Rotating Equipment Reliability Optimization & Continuous ImprovementRotating equipment is essential for gas and oil processing plants. The designers as well as the operating and maintenance staff are usually confronting with major issues regarding the reliability, optimization and contin ... |
|
Register |
|
|
Intelligent Pigging & Mechanical Cleaning Of Offshore & Onshore PipelinesThis RECTUS Intelligent Pigging & Mechanical Cleaning of offshore & Onshore Pipelines training course consolidates the fundamental knowledge and experiences required by pipeline operators to ensure the pipeline network i ... |
|
Register |
|
|
Mechanical Equipment: Compressors, Pumps, Motors & Variable Speed DrivesThis course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and ... |
|
Register |
|
|
Recent Trend In Furnaces, Heat Exchanger And Coolers In Petrochemical PlantsHeat exchangers are designed to transfer heat more efficiently from one medium to another. Typically, heat exchangers use fluids to store heat but recently, with the creation of more advanced technology; gases can now be ... |
|
Register |
|
|
Turbo Machinery Monitoring And Problem AnalysisThis course is for experienced mechanical equipment engineers to develop and expand their capabilities in monitoring and problem analysis of turbo machinery. |
|
Register |
October-2026 |
|||
|---|---|---|---|
|
|
Advanced Topics in Mechanical Failures and System AnalysisMechanical failures are the cause of the production stops and should be eliminated with correct maintenance and understanding of failures. Mechanical failure analysis provides the causes of the failures, which ought to ... |
|
Register |
|
|
Bearing Types, Installation & DisassemblingThis course is designed to help the participants to master the fundamentals of bearing technology. The program covers proper bearing installation, removal, lubrication and troubleshooting. It introduces a maintenance emp ... |
|
Register |
|
|
Fitness for Service Assessment: API 579-1 and ASME FFS StandardsFitness-For-Service (FFS) assessments are quantitative engineering evaluations that are performed to demonstrate the structural integrity of an in-service component that may contain a flaw or damage. This training course ... |
|
Register |
|
|
Methods of Shaft AlignmentThis course discusses the importance of alignment. Participants will be able to identify the area of error and correct it accordingly. They will learn how to correct soft foot, check runout, align two pieces of rotating ... |
|
Register |
|
|
Machine ElementsEvery machine uses machine elements for either statical or dynamical purposes. This course is designed to give the information on machine design and selection of machine elements as well as basic facts of machine element ... |
|
Register |
|
|
Study of Hydraulic Circuit Components, Fittings and HosesHydraulic Circuit Components course helps participants to understand the fundamentals of hydraulic circuits technology. It is designed to familiarize them with hydraulic circuits principles such as pumps, actuators, valv ... |
|
Register |
|
|
Machinery Vibration & Condition MonitoringAn introduction to performing vibration analysis within a condition-monitoring program. Various techniques used to diagnose machinery condition are reviewed, including time waveforms, spectral analysis, phase measurement ... |
|
Register |
|
|
ASME B31.3 Process Piping Code Design RequirementsThis intensive five-day course is designed to give the participants a thorough understanding of Process Piping Code, ASME B31.3. and its practical use for all aspects right from Piping Design to testing and certification ... |
|
Register |
|
|
Fundamentals of Pipelines: Design, Inspection, Testing, and Hydraulic ModelingPipelines play a crucial role in modern society, serving as the backbone of many industries and essential services |
|
Register |
|
|
Mechanical Seals & Gland Packing'sIn this 5-day course, participants will gain a strong technical and practical understanding of mechanical seals and gland packing through the exploration of design features and implications of many sealing pump systems. ... |
|
Register |
|
|
Boiler Operations and Maintenance with Inspection, Repairs and Alterations Combo Course - ASMEBoilers are important energy consuming equipment in most manufacturing plants, and their production of steam or hot water generally uses old and well proven technology. Basic boiler technology has changed relatively litt ... |
|
Register |
|
|
Advanced Pump Maintenance, Troubleshooting & Best PracticesIn this 5-day course, participants will gain a strong technical and practical understanding of pumps through the exploration of design features and implications of many pump types, pump systems, pump installation, pump p ... |
|
Register |
|
|
Heat Exchanger Overhaul & Testing TechniquesThis course concentrates on heat exchanger hardware, performance requirements, overhaul procedures, testing techniques, maintenance and repair, and life extension. The material applies to tubular exchangers used in chemi ... |
|
Register |
|
|
Pneumatic and hydraulic systems, Fault Diagnostics Instrument TrainingThis course is an introduction to the basic hydraulic and pneumatic systems and devices found in advanced manufacturing facilities. Underlying scientific principles and their practical applications are covered. |
|
Register |
|
|
Advanced machinery dynamics and BalancingThis advanced course provides a comprehensive understanding of the dynamic behavior of rotating machinery and the principles of vibration and balancing as applied in modern industrial environments. Participants will expl ... |
|
Register |
|
|
Gas Turbine BalancingThis course provides a comprehensive understanding of gas turbine dynamics and balancing principles. Participants will gain knowledge of rotor behavior, vibration analysis, and balancing techniques to enhance turbine rel ... |
|
Register |
|
|
Mechanical Shaft Alignment & Vibrational AnalysisThis training provides participants with a complete understanding of shaft alignment principles and vibrational analysis techniques essential for maintaining and improving the performance of rotating machinery. |
|
Register |
|
|
Pumps, Compressors And Turbines TroubleshootingThis course is to provide the trainees with a strong background in the field of Advanced Rotating Equipment (Pumps, Compressors, and turbines) maintenance and troubleshooting. In addition, the trainee will have a backgr ... |
|
Register |
|
|
Machinery Failure Analysis, Prevention & TroubleshootingThis course provides participants with in-depth knowledge of machinery failure mechanisms, diagnostic techniques, preventive strategies, and effective troubleshooting methods. |
|
Register |
|
|
Combined Cycle Gas Turbine PerformanceThis course goes through the overview of a Combined Cycle Gas Turbine, this will be followed by the different types of Gas Turbine. This is then expanded on to give a detailed understanding of the performance and managem ... |
|
Register |
|
|
Pipeline Design, Maintenance & Rehabilitation PracticesThe intent and objective of this course is to provide the participants with the information relative to the basic concepts and principals involved with the design, inspection and testing of pipeline, Guidelines and notes ... |
|
Register |
|
|
Piping Systems Mechanical Design And SpecificationThis course for engineers and piping system designers reviews the key areas associated with the design of piping systems for oil and gas facilities. |
|
Register |
November-2026 |
|||
|---|---|---|---|
|
|
ASME B31.3 Process Piping Design CodeThis interactive training course provides an introduction to the Code, covering the requirements for the design, analysis, materials, fabrication, testing and inspection of process piping systems. Changes to the latest e ... |
|
Register |
|
|
Centrifugal Compressor & Steam TurbineCentrifugal compressors are a sub-class of dynamic axisymmetric work-absorbing turbomachinery. In a centrifugal compressor, energy is transferred from a set of rotating impeller blades to the gas. It is also called som ... |
|
Register |
|
|
Measuring Mechanical Vibrations and Methods of MeasurementThis course is designed to provide participants with an introduction to the fundamental concepts of vibration measurment. Participants will learn an appreciation for harmonic motion as well as the modeling of mechanical ... |
|
Register |
|
|
Gears Types, Installation and MaintenanceKnowledge of gears and gear systems is critical in today's mechanized world. This course covers gear basics, installations, maintenance and troubleshooting as well as parallel and perpendicular shaft configurations; attr ... |
|
Register |
|
|
Principles and Components of Hydraulic SystemsThe course discusses to expand the maintenance technicians knowledge and skills in the area of Industrial Hydraulic applications. It begins with an overview of hydraulic principles, discusses the function, operation and ... |
|
Register |
|
|
Valves Classes & Pressure Rating, SRV’s Inspection & MaintenanceValves and Pressure Relieving Devices plays a vital role in assuring plant integrity and safe operation by avoid exposure of plant equipment to un-safe actions and excess pressure for which they are not designed and not ... |
|
Register |
|
|
Pipeline Design, Inspection, and TestingThe intent and objective of this course is to provide the participants with the information relative to the basic concepts and principals involved with the design, inspection and testing of pipeline, Guidelines and notes ... |
|
Register |
|
|
Heating, Ventilation, Air-Conditioning (HVAC) & Refrigeration Systems: Design, Installation, Maintenance & TroubleshootingThis program is designed for engineers and technicians from a wide range of abilities and backgrounds and will provide an excellent introduction to the fundamentals of Heating, Ventilation and Air-conditioning. It commen ... |
|
Register |
|
|
Mechanical Integrity, Safety & ReliabilityThis course will provide a comprehensive review of the various aspects of engineered safety and mechanical integrity in refineries, oil & gas plants and petrochemical plants. Principal emphasis is placed on the primary m ... |
|
Register |
|
|
Heat Exchangers Operation, Maintenance & InspectionA heat exchanger is a component that allows the transfer of heat from one fluid (liquid or gas) to another fluid. Reasons for heat transfer include the following: • To heat a cooler fluid by means of a hotter fluid • T ... |
|
Register |
|
|
Application of Standards in Boilers, Pressure Vessels, and Piping SystemsPressure equipment such as boilers, pressure vessels, heat exchangers, pressure piping, and associated safety equipment are widely used in many industries (e.g., oil and gas, petrochemicals, fertilizers, hydrocarbon proc ... |
|
Register |
|
|
Hydraulics Principles, Troubleshooting and Circuit KnowledgeThe Fundamental Hydraulic & Pneumatic course is designed to equip delegates with the basic foundation knowledge and building blocks that underpin all hydraulic pneumatic systems. On completion of the course, delegates ... |
|
Register |
|
|
Effective HVAC Maintenance & TroubleshootingHVAC (Heating Ventilation & Air Conditioning) is a science and professionalism known by a good population in this world but knowing and justifying the reason for the proper decisions and selections are great additions to ... |
|
Register |
|
|
Advanced Machinery DiagnosticThis course provides attendees the training needed to extend their knowledge of machinery diagnostic techniques and rotor dynamics as applied to rotating machinery. In particular, they will learn the use of synchronous a ... |
|
Register |
|
|
Audits of Existing Rotating Machinery InstallationsUpon completion of this course, participants will gain a basic understanding of the main components and subsystems of audit procedures. They will learn to critique the advantages, applications, performance, and economics ... |
|
Register |
|
|
Utilities Equipment: Steam Generator, Water Treatment and Storage TanksThe Process Utility Systems training course will feature the importance and relevance of process utilities used in today industrial operations. It will familiarise the delegates with the various practices used for select ... |
|
Register |
|
|
Design & Fabrication Of Piping Systems & Code RequirementsNSI/API code requirements for design and construction is needed to assure the safety petroleum refinery and chemical plant piping. The designer, fabricator, supplier, erector, examiner, and inspector’s understanding and ... |
|
Register |
|
|
Research Methodology introduction for minimum flow assurance for main export pipelineFlow assurance is the application of multiple disciplines to ensure economic rates of flow from the hydrocarbon reservoir to a production facility over the life of a field and in any environment. A variety of problems ca ... |
|
Register |
|
|
Rolling Technology of Metals and SheetsThis course fly by the participants through a sky of Rolling Technology as a technical process have many types , many industries , many materials , many branches , many aspects and many advantages , If you want to fly yo ... |
|
Register |
December-2026 |
|||
|---|---|---|---|
|
|
ASME Section VIII Div. 2 Pressure VesselsBased on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of ASME Section VIII, Division 1&2 including background, organization, design, materials, fa ... |
|
Register |
|
|
Pump Selection, Operation and TroubleshootingIn every plant or production operation system, we find pumps. However, unlike bolts and nuts, neither industry nor production-operation management will put pumps in stock. It is NOT cost effective and is very uncommon pr ... |
|
Register |
|
|
Custody Transfer and Flow MeasurementCustody transfer in fluid measurement is defined as the metering point (location) where the fluid is being measured for sale from one party to another. It organizes the commercial transactions of good (Oil and Gas produ ... |
|
Register |
|
|
Heating, Ventilation, and Air Conditioning (HVAC)The Heating, Ventilation, Air Conditioning and Refrigeration (HVAC and R) industry designs, builds, maintains and repairs essential indoor comfort and cooling systems including heating, ventilation and air conditioning. ... |
|
Register |
|
|
Metallurgical Failure AnalysisThis course will give you a basic understanding of the concepts and practice of analyzing failed parts. Such analyses will save money by eliminating repeated part replacement and increase customer satisfaction. They can ... |
|
Register |
|
|
Gas Turbine and Steam Turbine balancingA comprehensive gas and steam turbine course offers a deep dive into the fundamental principles, design, operation, and maintenance of gas and steam turbines. These turbines are pivotal in power generation and are extens ... |
|
Register |
|
|
Pumps & Compressors Operation, Maintenance &TroubleshootingPumps and compressors are essential components in almost all industries in that they are required to meet system demands and operate reliably. Further, since they can consume approximately 30% of a plant’s total energy u ... |
|
Register |
|
|
Fundamentals of Pipelines: Design, Inspection, Testing, and Hydraulic ModelingPipelines play a crucial role in modern society, serving as the backbone of many industries and essential services |
|
Register |
|
|
Heating, Ventilation & Air Conditioning (HVAC)The Heating, Ventilation, Air Conditioning and Refrigeration (HVAC and R) industry designs, builds, maintains and repairs essential indoor comfort and cooling systems including heating, ventilation and air conditioning. ... |
|
Register |
|
|
Bearings & Lubrication Applications, Methods, and HandlingIn this 5-day course, participants will gain a strong technical and practical understanding of bearings design features and implications of many bearings types. This course will provide the participants with ... |
|
Register |
|
|
Machinery Bearings, Lubrication & Reliability (Engineering Tribology)In this 5-day course, participants will gain a strong technical and practical understanding of bearing design features and implications of many bearings types. This course will provide the participants with the knowledge ... |
|
Register |
|
|
Advanced Pump Maintenance, Troubleshooting & Best PracticesIn this 5-day course, participants will gain a strong technical and practical understanding of pumps through the exploration of design features and implications of many pump types, pump systems, pump installation, pump p ... |
|
Register |
|
|
Pumps, Compressors And Turbines TroubleshootingThis course is to provide the trainees with a strong background in the field of Advanced Rotating Equipment (Pumps, Compressors, and turbines) maintenance and troubleshooting. In addition, the trainee will have a backgr ... |
|
Register |
|
|
Mechanical Shaft Alignment & Vibrational AnalysisThis training provides participants with a complete understanding of shaft alignment principles and vibrational analysis techniques essential for maintaining and improving the performance of rotating machinery. |
|
Register |
|
|
Advanced Troubleshooting Of Rotating EquipmentThis aims to convey the latest thinking and best practice of machinery vibration monitoring and analysis via lectures, case studies, video films, and friendly software and course activities. The course gives a detailed a ... |
|
Register |
|
|
Machinery Failure Analysis, Prevention & TroubleshootingThis course provides participants with in-depth knowledge of machinery failure mechanisms, diagnostic techniques, preventive strategies, and effective troubleshooting methods. |
|
Register |
|
|
Advanced Valve Technology: Design, Selection, Installation, Applications, Sizing, Inspection, Maintenance & TroubleshootingPower plant and other petrochemical industries do deal with different types of valves. All piping systems are fitted with valves for controlling purposes or safety requirements. Understanding the function of each valve t ... |
|
Register |
|
|
Piping Mechanical Design & SpecificationThis foundation level course for engineers and piping system designers reviews the key areas associated with the design of piping systems for oil and gas facilities. |
|
Register |
|
|
Intelligent Pigging & Mechanical Cleaning Of Offshore & Onshore PipelinesThis RECTUS Intelligent Pigging & Mechanical Cleaning of offshore & Onshore Pipelines training course consolidates the fundamental knowledge and experiences required by pipeline operators to ensure the pipeline network i ... |
|
Register |
|
|
Mechanical Equipment: Compressors, Pumps, Motors & Variable Speed DrivesThis course will provide a comprehensive understanding of equipment operating characteristics. It will introduce delegates to essential types of mechanical equipment, including positive displacement and dynamic pumps and ... |
|
Register |
|
|
Recent Trend In Furnaces, Heat Exchanger And Coolers In Petrochemical PlantsHeat exchangers are designed to transfer heat more efficiently from one medium to another. Typically, heat exchangers use fluids to store heat but recently, with the creation of more advanced technology; gases can now be ... |
|
Register |
|
|
Rotating Equipment Reliability Optimization & Continuous ImprovementRotating equipment is essential for gas and oil processing plants. The designers as well as the operating and maintenance staff are usually confronting with major issues regarding the reliability, optimization and contin ... |
|
Register |
|
|
Turbo Machinery Monitoring And Problem AnalysisThis course is for experienced mechanical equipment engineers to develop and expand their capabilities in monitoring and problem analysis of turbo machinery. |
|
Register |
Providing services with a high quality that are satisfying the requirements
Appling the specifications and legalizations to ensure the quality of service.
Best utilization of resources for continually improving the business activities.
BTS keen to selects highly technical instructors based on professional field experience
Since BTS was established, it considered a training partner for world class oil & gas institution
1st floor, Incubator Building- Masdar City - Abu Dhabi - United Arab Emirates
Sun to Fri 09:00 AM to 06:00 PM
Contact Us anytime!