April-2025 |
|||
|---|---|---|---|
|
Boiler & Pressure Vessel: Design & Fabrication of Pressure VesselsBased on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Boiler & Pressure Vessel: Design & Fabrication of Pressure VesselsBased on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
Construction & Inspection Requirements for PipelinesUnderstand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
Fundamentals of Storage Tank Design, Construction & MaintenanceThe success of every company depends on each employee's understanding of the key business components. Employee training and development will unlock the companies' profitability and reliability. When people, processes, an ... |
|
Register |
|
Introduction to Maintenance of Aboveground Atmospheric Storage TanksAPI 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January 1991. Its scope encompasses the maintenance, inspection, repair, al ... |
|
Register |
|
Process Piping Code Design RequirementsThis intensive course is designed to give the participants a thorough understanding of Process Piping Code, ASME B31.3 and its practical use for all aspects right from Piping Design to testing and certification. It offer ... |
|
Register |
|
Metallurgy, Corrosion, CoatingsThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
Welding Technology: Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
.jpg)
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets, but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deteri ... |
|
Register |
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
.jpg)
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
May-2025 |
|||
|---|---|---|---|
|
Carbon & Low Alloy Steel Materials for Sour ServiceThis comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
Welded Tanks for Oil StorageThe design requirements of API Standard 650 will be explained, and their application demonstrated through example problems. Material, fabrication, and erection requirements documentation will also be reviewed. The candid ... |
|
Register |
|
Welding Codes & MetallurgyThis is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offshore ... |
|
Register |
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
June-2025 |
|||
|---|---|---|---|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining IndustryOver the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
Fitness for Service FFSThe American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
Storage Tank Inspector Examination Preparatory CourseAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
Fundamentals of Welding EngineeringThe course covers the basic science and practical application of the most utilized welding processes along with other essential topics such as: welding terminology, weld design, welding safety, electrical theory, the wel ... |
|
Register |
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
July-2025 |
|||
|---|---|---|---|
|
|
Boiler & Pressure Vessel: Design & Fabrication of Pressure VesselsBased on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Fundamentals of Storage Tank Design, Construction & MaintenanceThe success of every company depends on each employee's understanding of the key business components. Employee training and development will unlock the companies' profitability and reliability. When people, processes, an ... |
|
Register |
|
|
Introduction to Maintenance of Aboveground Atmospheric Storage TanksAPI 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January 1991. Its scope encompasses the maintenance, inspection, repair, al ... |
|
Register |
|
|
Welded Tanks for Oil StorageThe design requirements of API Standard 650 will be explained, and their application demonstrated through example problems. Material, fabrication, and erection requirements documentation will also be reviewed. The candid ... |
|
Register |
|
|
Metallurgy, Corrosion, CoatingsThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Welding Technology: Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
August-2025 |
|||
|---|---|---|---|
|
|
Carbon & Low Alloy Steel Materials for Sour ServiceThis comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Fitness for Service FFSThe American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Process Piping Code Design RequirementsThis intensive course is designed to give the participants a thorough understanding of Process Piping Code, ASME B31.3 and its practical use for all aspects right from Piping Design to testing and certification. It offer ... |
|
Register |
|
|
Welding Codes & MetallurgyThis is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets, but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deteri ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
September-2025 |
|||
|---|---|---|---|
|
|
Construction & Inspection Requirements for PipelinesUnderstand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining IndustryOver the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory CourseAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
Fundamentals of Welding EngineeringThe course covers the basic science and practical application of the most utilized welding processes along with other essential topics such as: welding terminology, weld design, welding safety, electrical theory, the wel ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offshore ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
October-2025 |
|||
|---|---|---|---|
|
|
Boiler & Pressure Vessel: Design & Fabrication of Pressure VesselsBased on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabricati ... |
|
Register |
|
|
Fitness for Service FFSThe American Petroleum Institute (API) conducts training classes that can help the candidates understand and use the techniques Fitness-For-Service Assessments of pressurized equipment including pressure vessels, piping, ... |
|
Register |
|
|
Welding Codes & MetallurgyThis is an introductory course to provide the basic understanding of the proper use and interpretation of ASME Section IX - Welding Qualifications Code and its related ASME construction codes. To accomplish this objectiv ... |
|
Register |
|
|
Metallurgy, Corrosion, CoatingsThis course presents a history of metals and the background on the origins of various metals. It provides an explanation of physical characteristics of metals, including the reason metals behave differently than non-meta ... |
|
Register |
|
|
Welding Technology: Welding, Fabrication and Inspection (AWS, ASME and API Codes)Welding Technology plays a major role in all maintenance and fabrication activities in the industry. Production equipment, a highly sophisticated welding technique and qualified personnel allow processing or production o ... |
|
Register |
|
|
Materials, Fabrication, Inspection & Testing RequirementsThis is an introductory course to provide the basic understanding of the materials, fabrication, inspection and testing portions of ASME B31.3 for new construction and how it may be applied for post construction inspecti ... |
|
Register |
|
|
Metallurgical Failure Analysis & PreventionThis training course is designed to give a semi-detailed discussion of Metallurgical failure analysis in order for the course material to suit participants with or without a metallurgical background. The course is divide ... |
|
Register |
November-2025 |
|||
|---|---|---|---|
|
|
Carbon & Low Alloy Steel Materials for Sour ServiceThis comprehensive course will enable the candidates gain an understanding of general principles for selection of cracking-resistant materials used in H2S-containing environments in oil and gas production where the failu ... |
|
Register |
|
|
Damage Mechanisms Affecting Fixed Equipment in the Refining IndustryOver the past two decades, API has developed two major technologies to improve fixed equipment reliability in refining. They cover Fitness-For-Service (API 579-1/ASME FFS-1) and Risk-Based Inspection (RP 580/581). There ... |
|
Register |
|
|
Fundamentals of Welding EngineeringThe course covers the basic science and practical application of the most utilized welding processes along with other essential topics such as: welding terminology, weld design, welding safety, electrical theory, the wel ... |
|
Register |
|
|
Introduction to Maintenance of Aboveground Atmospheric Storage TanksAPI 653, Tank Inspection, Tank Repair, Tank Alteration and Tank Reconstruction, was first published by the American Petroleum Institute (API) in January 1991. Its scope encompasses the maintenance, inspection, repair, al ... |
|
Register |
|
|
Process Piping Code Design RequirementsThis intensive course is designed to give the participants a thorough understanding of Process Piping Code, ASME B31.3 and its practical use for all aspects right from Piping Design to testing and certification. It offer ... |
|
Register |
|
|
Storage Tank Inspector Examination Preparatory CourseAmerican Petroleum Institute (API) initiated an Aboveground Storage Tank Inspector Certification Program with the issuance of Supplement 1 to API 653, Tank Inspection, Repair, Alteration, and Reconstruction. This trainin ... |
|
Register |
|
|
An Introduction to Microbiologically Influenced Corrosion (MIC) in the Upstream IndustryMIC is one of the most insidious integrity threats not only to the hydrocarbon assets, but also to the associated production reservoirs. Poor and inadequate MIC mitigation therefore results both in asset equipment deteri ... |
|
Register |
|
|
Industrial Welding and Fabrication TechniquesThis training course is designed to give a comprehensive discussion of the subject of Applied Welding Metallurgy with emphasis on practical aspects. The course will concentrate on practical issues which are of interest t ... |
|
Register |
December-2025 |
|||
|---|---|---|---|
|
|
Construction & Inspection Requirements for PipelinesUnderstand the basics of Canadian Standards Association CSA Standard Z662 for pipeline design, materials, welding, installation, inspection and testing requirements for new construction, and post construction operation, ... |
|
Register |
|
|
Fundamentals of Storage Tank Design, Construction & MaintenanceThe success of every company depends on each employee's understanding of the key business components. Employee training and development will unlock the companies' profitability and reliability. When people, processes, an ... |
|
Register |
|
|
Welded Tanks for Oil StorageThe design requirements of API Standard 650 will be explained, and their application demonstrated through example problems. Material, fabrication, and erection requirements documentation will also be reviewed. The candid ... |
|
Register |
|
|
Asset Corrosion Management in the Oil and Gas IndustryCorrosion is a major integrity threat for many industries. The traditional method of corrosion control has been based on the corrosion engineering concept. However, in the early 2000s it was revealed in the UK’s Offshore ... |
|
Register |
|
|
Metallurgy for Non-MetallurgistsThis training course is designed to give a semi-detailed discussion of the subject of Engineering Metallurgy with emphasis on the physical metallurgy aspect. In order for the course material to suit participants with or ... |
|
Register |
|
|
Welding & Brazing Qualifications (Conforms to ASME Codes)This is a basic course that will train the candidates to comply with the layout, scope, use and requirements of ASME Section IX, Welding and Brazing Qualifications. Participants will gain a working knowledge of ASME Sect ... |
|
Register |
Providing services with a high quality that are satisfying the requirements
Appling the specifications and legalizations to ensure the quality of service.
Best utilization of resources for continually improving the business activities.
BTS keen to selects highly technical instructors based on professional field experience
Since BTS was established, it considered a training partner for world class oil & gas institution
1st floor, Incubator Building- Masdar City - Abu Dhabi - United Arab Emirates
Sun to Fri 09:00 AM to 06:00 PM
Contact Us anytime!